The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.

With 5 available kits for:

Road/gravel/CX with shallow rims (44mm tubeless valves and 21mmx10m Rim Tape)
Road/gravel/CX with deep rims (60mm tubeless valves and 21mmx10m Rim Tape)
XC (44mm tubeless valves and 25mmx10m Rim Tape)
DH/Enduro (44mm tubeless valves and 30mmx10m Rim Tape)
DH Wide (44mm tubeless valves and 35mmx10m Rim Tape)

Muc-Off Tubeless Kit

Name: Muc-Off Tubeless Kit
Brand: Muc-Off

AU$95.00

Quantity

Out of Stock

Please see product images
Remove all old rim strip or tape and clean rim.

Make sure the rim is clean and dry before applying tape.

Get the tape from the packet and line it up from the opposite side of the valve.

Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.

Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.

Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)

Overlap the tape by roughly 10 – 15cm

Leave a small amount unstuck so that you can cut the remainder off

Once cut sketch and pull the tape down to create a seal

Go around the rim with your thumb to make sure there is no air pockets or messed areas.

Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve

Grab your tubeless valve and remove the lock ring and o ring

Chose the right rubber fitment for your rim tape and insert valve into rim

Refit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)

Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)

Inflate tyre to create a fit (should hear some popping around the rim)

Release Air and remove valve core using the spare valve cap

Grab the sealant pouch and give it a shake

Unscrew the cap and fit on the valve in a up right position

While holding the pouch spin the wheel downward so that the pouch is now upside down

Insert the sealant by rolling the pouch down

Spin wheel back up right and remove pouch

Reinsert valve core and inflate to your pressure
1x 10m roll of Tubeless Rim Tape

2x Seal Patches

2x Black Tubeless Valves

2x Valve caps

2x Locking nuts

1x Valve core removal tool (doubles as a spare valve cap)

3 x Pairs of rubber bases for size choice

2x Pouches of No Puncture Hassle Tubeless Sealant

Muc-Off Tubeless Kit

Valve Size Guide

How To

Rim Tape Size Guide

What's Included